Car lifts are available in Hydraulic, Geared Traction or MRL Gearless in a variety of Door options and Cabins as per customers requirements.

Hydraulic :

Capacity (Kgs)	Shaft Size		Car Size			Entrance		Machine Room		Pit Depth	Over Head
	Width	Depth	Width	Depth	Height	Width	Height	Depth	Height
2500	3600	6000	2600	5266	2300	2300	2100	4000	4000	1500	4000
3000	4000	6000	3000	5266	2300	2300	2100	4000	4000	1500	4000

Traction :

Capacity (Kgs)	Shaft Size		Car Size			Entrance		Machine Room		Pit Depth	Over Head
	Width	Depth	Width	Depth	Height	Width	Height	Depth	Height
2500	3500	6000	2600	5266	2300	2300	2100	4000	6000	1500	5000
3000	3900	6000	3000	5266	2300	2300	2100	4000	6000	1500	5000

MRL :

Capacity (Kgs)	Shaft Size		Car Size			Entrance		Machine Room		Pit Depth	Over Head
	Width	Depth	Width	Depth	Height	Width	Height	Depth	Height
2500	3225	5500	2000	5000	2300	2000	2300	1800	5000	1500	5000
3000	3900	6000	3000	5266	2300	2300	2100	4000	6000	1500	5000

GENERAL NOTES

• Pit depth should not be less than 1800mm (In critical cases min. 1700mm can be accepted)
• Lintel required 2400mm from finish floor level.
• Overhead should not be less than 5000 mm (In critical cases min. 4900 can be accepted)
• Both side walls should be min. 230mm RCC, front brick wall 230mm preferred
• Trap Door required at machine level (If trap door not possible then ladder to be provided by client for machine access.)
• For ARD device space required at top floor landing.
• Floor height of minimum 2300 mm needed for door openings.


 

REMARKS

• Maximum Car Travel is Permitted upto 60 metres.
• Speeds available are 0.50 mps & 1 mps.